Published

How to Read IIHS Headlight Ratings Before You Pick a Trim

Headlight ratings are easy to misread if you treat them as one score for a whole model. The evaluation gives separate ratings for each headlight system when multiple systems are available, so the practical first step is to confirm the exact system offered on the trim you are considering [1]. A rating attached to one version does not automatically describe another version with different lights.

Use the rating to answer two separate questions: how far the lights illuminate the road, and whether they create glare for oncoming drivers. The evaluation measures the distance over which headlights provide adequate illumination on straightaways and curves, and it also checks for glare that headlights may cause for drivers of oncoming vehicles [1]. A useful buying note is to look for both parts of the result rather than focusing only on seeing distance.

The track layout matters when you compare results. Vehicles are driven on five approaches: a straightaway, gradual curves to the left and right, and sharp curves to the left and right [1]. Each approach is driven six times, three times with low beams and three times with high beams [1]. So a system that performs well on a straight road still needs to be checked against the curve results.

The distance measurement uses a specific threshold: light must reach at least 5 lux at 10 inches above the ground [1]. The source also notes that a full moon on a cloudless night illuminates the ground below to about 1 lux [1]. For a reader, that means the rating is about usable light farther down the road at a defined level, not simply a subjective impression of brightness.

Glare is measured from low beams in each scenario at 3 feet, 7 inches from the ground [1]. That detail is worth noticing because low beams are the setting you will use around other traffic. When you read a rating, separate the low-beam glare result from the high-beam distance result instead of letting one strong number cancel out a weak one.

Another practical detail is that headlights are tested as received from the dealer, with no adjustments of aim, since few vehicle owners make such adjustments [1]. Treat the rating as a description of the system in that condition, not as a promise about how it will perform after any later change. This is especially relevant if you are comparing a car you plan to keep stock with one where the lights may be altered.

Finally, read the demerits as a summary of trade-offs. Systems receive demerits if high-beam or low-beam illumination falls short on any approach and if low beams produce glare for oncoming drivers [1]. Longer illumination distance is required for the straightaway than for curves, and for gradual curves than for sharp curves [1]. Low-beam demerits are reduced for vehicles with high-beam assist, which automatically switches between high and low beams based on the presence of other vehicles [1]. Use those rules to compare trims on equal terms, not as a substitute for checking the exact system.

Sources and dates checked

  1. Headlights (2026-11-19)

This article was created with AI assistance and checked by our automated editorial process.

General information; not a binding quote or individual investment, legal, engineering or medical advice.